George,
Is that $2300 Aust. for the 4 port or the 6 port Renesis replacement
engine?
What is the shipping weight, is it 320# same as the 13B?
Tony Beaton
> > Hi guys,
> > Sorry to inject a newbie question into this fascinating discussion,
but
I
> am
> > building a single place gyro and wish to power it with a single-rotor
> > Renesis. The airframe is designed for a Rotax 503, and in this
> > configuration will accommodate a 66" prop. Does anyone know where I
can
> > find drawings of the Renesis engine, so that I can work out the
geometry
> of
> > the engine mount and redrive offset in order to swing a 68" prop?
Also,
> any
> > info re: CG of the Renesis would be helpful.
> >
> > Regards,
> > Duncan of Devonport
> > Auckland
> > New Zealand
> >
> >
> > I assume you have a source for single rotor Renesis engines. If so
> > there are a bunch of people on here that would like to know
> > about it. Here are some drawings of the regular 13B. From this you
> > subtract one rotor housing and the center housing. This is about
> > as close as I can come. The CG should be very close to the center
> > of the engine. You will have to add the starter, alternator and other
> > accessories CG's to the basic engine CG.
> >
> > Paul Lamar
>
> Duncan,
> I'm working on a forged single e-shaft, as we speak ( 4340 material). I
will
> be using 12A end housings with RX8 rotor/stationary gear and timing
> wheel/pick-up.
>
> Local RX8 dealer is $2,300 Aust, for the motor. This has most things on
it
> except a Bellhousing and starter. I added this info as your fairly
local.
>
> I will use my own Aussie Bellhousing and PSRU.
> Tracy Crooks EMS/EM2.
>
> The weight of a 13B is approx 320 lbs (all-up) [firewall forward]
> the weight of the single is
> approx 60 lbs less. That should help with your W&B.
> There is someone in NZ making shafts, but I can't remember who they are.
> Please advise us if you find out if they do single e-shafts and the
price
of
> course.
> Hope that helps.
> George ( down under)
>
George,
Is that $2300 Aust. for the 4 port or the 6 port Renesis replacement
engine?
What is the shipping weight, is it 320# same as the 13B?
Tony Beaton
Hey guys the engine does not weigh 320 pounds. The basic engine
weighs under 200 pounds. That 320 pound figure includes everything
firewall forward including the gear box, rad, motor mounts, muffler,
intake manifold. prop, coolant, oil, etc., etc., etc..
Paul Lamar
Tony,
Yes ! 4 [port] and 6 [port] cost the same.
Yes! weight is pretty much the same as the 13B, but the 320lbs is a wet
weight with PSRU weight [firewall forward. EVERYTHING!] . I don't know
what a dry weight is [short block, no nothing! 190 pounds], however if you
contact Rupert he might know OR I could contact him for you?
A quick call and the answer is 100 Kilos or 220 lbs [shipping weight????].
So some one from the States has already got an engine from this chap and
gave a shipping and paperwork cost of $550 US.
George ( down under).
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2005 All world wide rights reserved.