>
> George(down under)
>
> Thanks for your time and involvement in this, sometimes the only ones we
can
> rely on in our hobby is each other.
> No I'm not in WA,or WA. USA, (this internet stuff makes this a small
world
> some times) I'm in Calgary, Alberta, Canada, so I don't deal in $US
unless
> your in one of those countries that needs them, we can get AUST$ Drafts
> here. That's why I'm asking all these nuisance questions in case there
is
a
> big difference in the exchange rates you see, for me just quote in
AUST$.
> I'm guessing your in Queensland somewhere(that's a big place), is that
> right? What is the engine cost in Aust$? What would the shipping costs
be,
> different country and in Aust$? Who is Rupert (the dealer I assume),
how
do
> I contact him when and if I'm ready, I'm also checking with some local
> dealers who import direct from Japan. Sorry for all the confusion.
>
>
> > > Tony,
> > > Who cares how, as long as it arrives safely. I'm sure Rupert has
many
> > > contacts, he's been sending engines around the country for years.
> > > George ( down under)
> > >
> > > WA = Western Australia. Not Washington State.
> > >
> > > Paul Lamar
> >
> > Tony,
> > Sorry mate - that would be $ 550 to the States, I was thinking your in
WA
> as
> > well! Still that's $2,300 ( total) in your dollars.
> > BTW I'm not involved in any of this for financial gain, I told Rupert
that
> > there was interest from the states as well and they may wish me to
> hand-pick
> > an engine for them. He's OK with that as long as you advise him at the
> time
> > of payment/order!
> > George ( down under)
>
>
> George(down under)
>
> Thanks for your time and involvement in this, sometimes the only ones we
can
> rely on in our hobby is each other.
> No I'm not in WA,or WA. USA, (this internet stuff makes this a small
world
> some times) I'm in Calgary, Alberta, Canada, so I don't deal in $US
unless
> your in one of those countries that needs them, we can get AUST$ Drafts
> here. That's why I'm asking all these nuisance questions in case there
is
a
> big difference in the exchange rates you see, for me just quote in
AUST$.
> I'm guessing your in Queensland somewhere(that's a big place), is that
> right? What is the engine cost in Aust$? What would the shipping costs
be,
> different country and in Aust$? Who is Rupert (the dealer I assume),
how
do
> I contact him when and if I'm ready, I'm also checking with some local
> dealers who import direct from Japan. Sorry for all the confusion.
>
> Tony Beaton E-mail: twofooter@nucleus.com
Have you talked to Adam at RX7 Specialities ?
John
No, but I'm open to all input, what's he got and where is he located,
and do you have an E-mail address for him?
Tony2
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2005 All world wide rights reserved.