Excellent pattern making and casting. Very light weight for a sand
casting.
Designed to fit the four and six port 2nd gen Mazda engines. Should work
on a six port RX8 engine with modifications. An easy 200 HP at
7500 RPM with a 2.85:1 gear box.
Contact Francois for a price.
http://www.mistral-engines.com/
Look for their booth and Wankel engine powered Piper at OSH
Paul,
I doubt very much that's a sand casting, I'm not doubting that you were told
it was a sand casting. I might however be done in a low pressure cast iron
mold.
This is what I was looking at for the bellhousing.
George (down under)
No it is a sand casting George. You can tell by the surface roughness in
the inside. In fact Francois is thinking about some sort of internal finishing
such as the Extrude Hone process. The outside have been smoothed somehow
or merely powder coated paint thereby smoothing the surface finish.
Paul Lamar
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2005 All world wide rights reserved.