Subject: New intake manifold from Mistral
From: Rotary Engine
Date: 6/22/2005, 10:26 AM
To: AA-me


Excellent pattern making and casting. Very light
weight for a sand
casting.Designed to fit the four and six port 2nd
gen Mazda
engines. Should work
on a six port RX8 engine with modifications. An
easy 200 HP at
7500 RPM with a 2.85:1 gear box.

Contact Francois for a price.

http://www.mistral-engines.com/

Look for their booth and Wankel engine powered
Piper at OSH

--------------------------------------

I forgot to mention a very nice feature of this
manifold.
Since the injectors are on the hot side Mistral
designed into
the lower part of the manifold  a way  of adding a
stainless
steel sheet metal box to enclose the injectors and
shielded them
from exhaust manifold heat. It also catches any
leaking fuel
and carries it away safely. Notice the small slots
cast into
and machined in the lower section of the manifold.
These
slots are designed to accept the SS sheet metal.
Very professionally done. Excellent design.

Paul Lamar

This does look like very nice work.  I'll need (at
least) a lower intake manifold for a 6-port Renesis
engine.

Are the benefits and risks of having the injectors
on this side of the engine worthwhile for a non-PP
engine?

Scott Gettings

The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2005 All world wide rights reserved.