Excellent pattern making and casting. Very light weight for a sand casting.
Designed to fit the four and six port 2nd gen Mazda engines. Should work
on a six port RX8 engine with modifications. An easy 200 HP at
7500 RPM with a 2.85:1 gear box.
Contact Francois for a price.
http://www.mistral-engines.com/
Look for their booth and Wankel engine powered Piper at OSH
--------------------------------------
I forgot to mention a very nice feature of this manifold.
Since the injectors are on the hot side Mistral designed into
the lower part of the manifold a way of adding a stainless
steel sheet metal box to enclose the injectors and shielded them
from exhaust manifold heat. It also catches any leaking fuel
and carries it away safely. Notice the small slots cast into
and machined in the lower section of the manifold. These
slots are designed to accept the SS sheet metal.
Very professionally done. Excellent design.
Paul Lamar
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2005 All world wide rights reserved.