Subject: Report on Dave Leonards turbo 2 rotor.
From: Rotary Engine
Date: 6/22/2005, 5:45 PM
To: AA-me


   Hi Dave,


   BTW Whats is the latest on your turbo? Last I heard you found the
   ignition
   timing too advanced. Have you fixed that and flown it again?

   Paul Lamar


It takes about 10 sec. to adjust the timing so yes, I flew about 4 hours
last weekend.  Up to Oceano for a camp-out.

The problem now seems to be compressor stall so I am going easy on the
boost.  Have created a hole in the intake that I am slowly enlarging.
That will be temporary fix until I can put on a ported engine and/or put
on a different compressor.

-- 
Dave Leonard
Turbo Rotary RV-6 N4VY
http://members.aol.com/_ht_a/rotaryroster/index.html
http://members.aol.com/vp4skydoc/index.html

What are the indications of compressor stall?
I'll be glad to sponsor a dyno test of your engine if you wish.
After we finish some EFI runs on Marks engine (hopefully the end of this week) Mazdatrix will not need their dyno for awhile.
I'll also help out on a turbine tach. What EGT's are you now seeing?

Paul Lamar

The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2005 All world wide rights reserved.