Subject: COZY: Paul Conner update
From: Rotary Engine
Date: 6/23/2005, 9:08 PM
To: AA-me



Hello Paul.
I was off the list when this happened. Would you be able to send
one of the notes that announced details of the accident?
Thanks
Peter

My agreement with the FAA when they allowed me to examine the wreckage
and the crash site was not to publish the details. Sorry. I wish to
maintain that relationship in the future. However I will be glad to
review
anyones new design for a fuel system based on what I learned from
that investigation.

Paul Lamar

Hi Paul,

While I respect that you have an agreement with the FAA that you have to
keep, it seems a shame to keep the data under wraps.  Out of curiosity,
what was the FAA's end of the commitment.  Do they have any
responsibility to report the accident findings in a complete and useful
way?  Also, if you found that the crash was caused by something in the
installation that you HAVEN'T already been preaching, how will you be able
to integrate the new information without breeching the agreement?  I would
like to be able to learn something from the accidents of others.


Regards,

Matt-

Yes they do have a commitment. The NTSB will eventually file
a final report to:

http://www.ntsb.gov/ntsb/Month.asp

Be assured if the subject of a fuel system comes up and I see something
that based on my 45 years of engineering experience that I think won't
work I will let everybody know about it :)

There are two fundamental things you need to know about fuel systems.
The pressure at any point in the system under all scenarios.
The temperature of the fuel under all scenarios.

The pressure is due to several factors. Head, which is the pressure
due to the weight of the fuel times the G load and air pressure caused by
the vents. An improperly designed vent system can empty a tank
in short order due to aerodynamic pressure alone.

The fuel temperature must be kept below the boiling point or
vapor lock will occur. Pressure affects the boiling point of fuel
just as it affects the boiling point of coolant in a cooling system.
A low pressure on the inlet side of a pump can cause the fuel
to boil at a lower temperature than you might think.

As one can see new fuel systems are more subtle and complicated than one
might otherwise imagine. They must be carefully and fully thought out.

Start by writing down every scenario (G load, aircraft attitude, etc.)
that you can imagine.

List expected pressure and temperatures under each scenario.

Paul Lamar



I guess the million dollar question is: Once the final report is
published, can you discuss specific observations from the investigation
or are those non-disclosure agreements not time-limited?

Dave

I will publish all I know and answer all the questions that I know
something about when the NTSB publishes.

Paul Lamar


The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2005 All world wide rights reserved.