> >
    > > Paul,
    > > George (down under) posted a question about the diameter of the
   inner
    > > oil
    > > seal O-ring.......Creavy had it listed as 0.093" whereas the
   list I have
    > > is 0.118".
    > > I may have missed the answer to the question........Which is
   correct ??
    > > --
    > > Kelly Troyer
    > > Dyke Delta/13B/RD1C/EC2
    > >
    > >
    > > > The proper oil O-ring sizes are:
    > > >
    > > > 0.093" section 4.68 inch ID
    > > > 0.118" section 4.33 inch ID ????
    >
    >
    > Kelly,
    > I purchased the Mazda oil 'O' rings and checked the sizes.
    > The 0.118" is the correct size for the 4.33 " ID - as Paul correctly
    > detailed above.
    >
    > My belief is that the info that Creavey has is a result of a typo
   in which
    > they transferred Paul's info to their own records - as all the
   other sizes
    > are, 0.093" - this is the only odd one out.
    >
    > I have contacted Creavey and ordered my "O" rings and asked them
   to amend
    > their records.
    >
    > Also note there are two types of "O" rings one to 400 degrees F
   and one to
    > 500 F. Select the latter one even if they quote on the 400F one,
   as they
    > initially did with me.
    > George ( down under)
    >

    Thanks George and Paul !!



    Kelly Troyer