Subject: Tracy's fuel injection system.
From: Rotary Engine
Date: 6/24/2005, 10:35 PM
To: AA-me



Does it hurt an injector to leave it on 100% (duty cycle)?
------------------------------------
Yes I think it does but I am not sure. PL



Hi Paul, I believe that you should size an injector so that it's duty cycle
is no more then 85%.  A link with some handy calculators, including one for
injector sizing, can be found at http://www.bgsoflex.com/auto.html.  This
site is maintained by Al Grippo and Bruce Bowling, the creaters of the
megasquirt diy efi controller.

Please snip the rest, I am including it only to give you a point of
reference.

"Bruce Bowling is an applications engineer with Arrow Electronics in
Columbia, MD. His experience includes large-scale control system design for
particle beam accelerators and military weapon test and evaluation."

"Al Grippo is a staff scientist at the Free Electron Laser Facility at
Jefferson Laboratories in Newport News, VA. Previously, he was the corporate
scientist for Analysis and Technology in Chesapeake, VA. His experience
includes computer modeling and simulation and complex process control for
military and physics research."

Cheers -- Ian


The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2005 All world wide rights reserved.