Subject: Two cycle oil in the sump.
From: Rotary Engine
Date: 6/26/2005, 7:02 AM
To: AA-me



Now that the subject of oil has arisen I'll try again.
A month or so ago I asked on this site if anyone knew what was wrong
with using top quality water cooled 2 stroke oil in rotaries, as is
common practice here in racing.
When I raised this with Tracy I was emphatically warned against it, but
as yet I have seen no evidence, or reason for this opinion.
Obviously the stuff is meant to burn cleanly without gumming up seal
grooves, and must be an excellent lubricant to work in the small
quantities available both when injected and pre-mixed. To me it seems
that its use in a rotary sump would be "light duty" compared with its
usual role.


John Evans


BTW there is nothing in the CD about using 2 cycle oil in a rotary
sump. You are on your own. Good luck. Frankly I would stick to Idemitsu
rotary engine oil as it has been specifically formulated and developed
at considerable cost to be used in the rotary engine. This oil was used
in the Mazda Lemans winning four rotor.

Paul Lamar


Don't forget most of us need a very high film strength oil because we are
running the gearbox in the same oil. It has to be a synthetic or high
phosphorus motor cycle oil.

Ian Beadle

Good point Ian. Tracy has been using Mobil One synth for a long time.
Idemitsu is also a synthetic but I don't know how much phosphorus
if any.

Paul Lamar

The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2005 All world wide rights reserved.