> Now that the subject of oil has arisen I'll try again.
> A month or so ago I asked on this site if anyone knew what was
wrong
> with using top quality water cooled 2 stroke oil in rotaries, as is
> common practice here in racing.
> When I raised this with Tracy I was emphatically warned against
it, but
> as yet I have seen no evidence, or reason for this opinion.
> Obviously the stuff is meant to burn cleanly without gumming up
seal
> grooves, and must be an excellent lubricant to work in the small
> quantities available both when injected and pre-mixed. To me it
seems
> that its use in a rotary sump would be "light duty" compared with
its
> usual role.
>
>>
> John Evans
>
>>
> BTW there is nothing in the CD about using 2 cycle oil in a rotary
> sump. You are on your own. Good luck. Frankly I would stick to
Idemitsu
> rotary engine oil as it has been specifically formulated and
developed
> at considerable cost to be used in the rotary engine. This oil
was used
> in the Mazda Lemans winning four rotor.
>
> Paul Lamar
Don't forget most of us need a very high film strength oil because
we are
running the gearbox in the same oil. It has to be a synthetic or high
phosphorus motor cycle oil.
Ian Beadle
Good point Ian. Tracy has been using Mobil One synth for a long time.
Idemitsu is also a synthetic but I don't know how much phosphorus
if any.
Paul Lamar
That's all well and good, but after about 50 hrs of flying time the oil
in the sump is 1/4 to 1/3 scavenged two-stroke oil anyway.
--
Dave Leonard
Turbo Rotary RV-6 N4VY
http://members.aol.com/_ht_a/rotaryroster/index.html
http://members.aol.com/vp4skydoc/index.html
You need to change your oil more often Dave :)
Paul Lamar
Or keep the oil mix ratio at 150 :1
Ian Beadle
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2005 All world wide rights reserved.