>>> We ran the p-port engine again today on the EFI system
>>> and slide throttle. Runs great. Will idle below 1000 RPM.
>>> Starts easily. Idles smoothly more or less under 1500 RPM.
>>> The mixture through out the RPM range is better with
>>> the $200 manifold referenced fuel pressure regulator
>>> but still a bit rich on the low end and a lean on the
>>> high end. We are running out of dyno time to do further
>>> mixture and ignition timing tuning. Max HP was 222.
222 HP at what RPM Paul?
Hans Conser
That was 7500.
I cut the runner lenght by 4 inches.
Pictures later today.
Hans
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2005 All world wide rights reserved.