Subject: P-port slide throttle.n Revision 7
From: Rotary Engine
Date: 7/6/2005, 12:35 PM
To: AA-me


You can put me down for a set of p-port intakes.
Blake

That is at least 4 sets so far. Do I hear five?

Paul Lamar


It this slide throttle a consideration for a non-PP,
"over-the-top" to a plenum configuration that would
normally use a standard throttle body?

Scott Gettings

Not needed for a side port engine. Could be designed but hardly worth
it.

Paul Lamar

The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2005 All world wide rights reserved.