Subject: P-port slide throttle.n Revision 7
From: Rotary Engine
Date: 7/6/2005, 12:54 PM
To: AA-me



Paul Lamar wrote:
A third question is: how does the minor leak from runner to runner
affect the organ pipe tuning if in fact it does affect it at all?
In this case the main contributor is connecting both runner's pressure
taps together with a hose. See the picture below.

The Real World Solutions EC2 (a.k.a. "Tracy's EFI/ignition system") has
two separate MAP sensors.  It seems like you could easily answer the
question by running two separate lines (one per port) instead of
plumbing them together.

See:
http://www.rotaryaviation.com/eficont.html

Russell Kent

Yes it does but each pressure sensor is only used with each computer.
Yes indeed if you programed each computer exactly the same
you could do a test where you compared pressure taps.

I should have said it would be nice if we four pressure sensors with
the P-port engine. Two per computer.

Paul Lamar
-- 
The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2005 All world wide rights reserved.