Subject: P-port slide throttle.n Revision 7
From: Rotary Engine
Date: 7/6/2005, 5:52 PM
To: AA-me



    You can put me down for a set of p-port intakes.
    Blake

    That is at least 4 sets so far. Do I hear five?

    Paul Lamar

I'm interested by the latest version Paul, unfortunately you are one
hole
short!
Bill Jepson (20B powered)

------------------------------------------------------
That is a problem unlikely to be solved since there are so few 3 rotors
out there relatively speaking. If you have a metal cutting band saw or
heavy duty
sheet metal shear it is  no problem making your own. Just takes a lot
more time.

Paul Lamar


Paul,
I would definitely be interested in a 20B slide-throttle.  I bet there
are enough other 20B lurkers to get 4 or 5 orders, maybe more.  With
CNC, it seems like it would be easy enough to do, and would justify a
higher price to boot.

Mark



The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2005 All world wide rights reserved.