Sorry to disappoint you but I've not got any access to CNC machines.
Maybe someone else on the list does.
Barry
OK I guess I will have to do it. How many people want a set?
Speak up. My guess is the whole set will be less than $50.
Paul Lamar
Paul, I would like a set. Remember I have access to CNC Plasma. I don't know if
this will help here or not. If you want me to try some cuts let me know. Aluminum
doesn't cut the cleanest, but a little sanding work and the parts look pretty good.
Finding the material may be a little challenge. Tom Webber
----------------------------------------
Can you cut aluminum? If so I can send you some material you can try it out on.
A water jet would work too.
Paul Lamar
Yes, the test peices are of 5053 H38 .080. Sorry we don't have a water Jet, just
Plasma. What thickness of 6061 do we need. I have a remnant dealer but he dosen't
always have the right thickness. Lately not much .125, let me know. T.W.
---------------------------------------
We need 3/16th. or .1875. I can have some drop shipped to you Tom.
Lets wait until we see the parts you sent.
Paul Lamar
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2005 All world wide rights reserved.