Subject: P-port slide throttle.n Revision 7
From: Rotary Engine
Date: 7/6/2005, 6:17 PM
To: AA-me


    You can put me down for a set of p-port intakes.
    Blake

    That is at least 4 sets so far. Do I hear five?

    Paul Lamar

I'm interested by the latest version Paul, unfortunately you are one hole
short!
Bill Jepson (20B powered)

------------------------------------------------------
That is a problem unlikely to be solved since there are so few 3 rotors
out there relatively speaking. If you have a metal cutting band saw or heavy duty
sheet metal shear it is  no problem making your own. Just takes a lot more time.

Paul Lamar

Bill,  if you need special ones made let me know what the dimensions are and I can program the CNC and cut the plates and spacers.  The other parts are on you.  Only the flat stuff.  Tom Webber


I was hoping you would say that Tom.

Paul Lamar

The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2005 All world wide rights reserved.