Subject: P-port slide throttle.n Revision 7
From: Rotary Engine
Date: 7/7/2005, 7:56 AM
To: AA-me




You can put me down for a set of p-port intakes.
Blake

That is at least 4 sets so far. Do I hear five?

Paul Lamar


Paul,
At a price point near $50, that's a deal I can't refuse.  Put me on the
list for one.
Aubrey


What are we talking about for $50?  Is this a slide throttle, or a complete
intake?

Bill Bradburry

Just the flat parts. You need tubing, trumpets, fuel rail and a plenum with
injector holders. I have some trumpets if anybody is interested.
$20 bucks cash for two ($10 each) with a stamped self addressed envelope.
Let me know.

3 attachments for the A O L challenged.

Paul Lamar




Paul, Where does one come by these tubing, trumpets, fuel rail and a plenum
with
injector holders?  Also, how or where did you get your tubes bent?  I assume
that they are mandrel bent...I live in Florida and am just getting started
into this 13b conversion, so I can be considered to know nothing about the
subject.

Bill Bradburry

You can get 2 inch 180 degree tubing bends .065" wall from Burns Stainless.
See the web site below for the URL or google.

I have some trumpets. Send a self addressed envelope and $20
cash and I will mail you a couple.

The fuel rail you will have to make your own or buy the parts from MSD Ignition.
There are other sources as well. google again.

Ed Klepies can assemble the whole thing and make a plenum to your
needs. What kind of airplane do you have?

3 attachments for the A O L challenged.

Paul Lamar.

The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2005 All world wide rights reserved.