You can put me down for a set of p-port intakes.
Blake
That is at least 4 sets so far. Do I hear five?
Paul Lamar
It this slide throttle a consideration for a non-PP,
"over-the-top" to a plenum configuration that would
normally use a standard throttle body?
Scott Gettings
Not needed for a side port engine. Could be designed but hardly worth
it.
Paul Lamar
Paul
I'll order a set of P ports as well. I now have two engines sitting in my
shop and looking for a RENESIS engine as well. Didn't you once say a turbo
charged RENESIS would not necessarily benefit from P-ports? Something along
the lines of "a turbo covers all sorts of design sins?
Doug in Japan
True but it has its own set of design sins. Just ask Dave Leonard :)
BTW I just noticed my RX8 engine idles at 1500 RPM when I start it
up from cold (80 F).
Paul Lamar
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2005 All world wide rights reserved.