Subject: P-port slide throttle.n Revision 7
From: Rotary Engine
Date: 7/8/2005, 6:44 AM
To: AA-me


snip.....
OK I guess I will have to do it. How many people want a set?
Speak up. My guess is the whole set will be less than $50.

Paul Lamar


Paul,

I'm interested in a set.

Regards,
Bill Siegel


I'll take one for the 13Brew tt.
Marc Wiese


Will they fit a 6-port Renesis?
    Mal Booth (downunder)

No. P-port only.

Paul Lamar


Sorry, I meant a P-Port modification to a Renesis which I presume is no
different to a P-Port 13b?. By the way We ordered two Renesis donks from
Rupert in Brisbane today,- great to deal with.
                 Mal Booth

---------------------------------------
There is a clearance issue with the water in port (lower) on the RX8 engine
front cover. I have not tried it with a RX8 engine yet. Perhaps you
will need a right angle water in port adapter. Here is a pic from Don Dunbar.
Also you will probably not be able to run the apex seal oil pump.
No real loss as most people mix apex seal oil with the fuel.

I would move the slide throttle out away from the block another
inch or two to clear the water in port right angle adaptor.

2 pics for aolchallenged. 3 days to aoldoomsday.

Paul Lamar

The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2005 All world wide rights reserved.