You can put me down for a set of p-port intakes.
Blake
That is at least 4 sets so far. Do I hear five?
Paul Lamar
Paul,
At a price point near $50, that's a deal I can't refuse. Put me on the
list for one.
Aubrey
What are we talking about for $50? Is this a slide throttle, or a complete
intake?
Bill Bradburry
Just the flat parts. You need tubing, trumpets, fuel rail and a plenum with
injector holders. I have some trumpets if anybody is interested.
$20 bucks cash for two ($10 each) with a stamped self addressed envelope. Let
me know.
3 attachments for the A O L challanged.
Paul Lamar
Paul
Sorry, I was confused. I thought you were selling the P-ports. As for the
throttle I can get it punched out next door. Let me know if you if need a
quote. Shipping might kill you though. How do you fabricate the Teflon
holes? Water jet?
Doug in Japan
I would be interested in that quote.
The Teflon holes are easily cut with a hole saw. I am not sure you can find
a 1 7/8th inch hole saw however. You might need to get close and trim the hole
with an exacto knife. I stuck mine in the mill and used a boring head.
A very quick job as Teflon is soft and easy to cut.
Paul Lamar
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2005 All world wide rights reserved.