>
> Now all  you have to do is talk Tracy into supporting six injectors.
> Good luck :)
>
> Paul Lamar
>
> -- Bill

You could wire the two yellows (they are 14 ohms) in parallel. Question is
would Tracy's injector driver transistors handle the extra current?

Ian


Tracy uses the IRL530N in the computer I have.
Continuous drain current 12A at 10 Volts. Peak pulse current 60 amps.

You will have a real problem with the staging as the red injectors
are real low flow indeed according to Tracy.

Paul Lamar


--------------------------------------------------------------------
OK, Here it is in straight forward terms.  I don't think it is needed
but if you want to run 6 injectors (in the belief that they are required
to flow sufficient fuel), use 2 yellows as the primaries and wire a
yellow & red in parallel for the secondaries.

Tracy Crook


The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2005 All world wide rights reserved.