Subject: Determining the shape of the intake pulse.
From: Rotary Engine
Date: 7/14/2005, 4:38 PM
To: AA-me


Paul L. writes:
If memory serves me correctly... if you take eight 10 bit (1024 decimal)
equally spaced samples during the time the intake port is open
and add them up that is 8,192 or a 13 bit number. No problem as most
microcomputers deal in 16 bits these days. If you then shift
one bit right four times (same as dividing by four) you will
then be back to a 10 bit number which should be roughly proportional to the
total amount of air in the intake port. No need for any floating point
math.

       Each shift is a division by two. Two shifts is a division by four.
Three shifts is a division by 8. Four shifts is a division by 16.

       Bill Dube'



-- 
The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2005 All world wide rights reserved.