Marc Pedings's injector flow tester is working
great. Thanks again Marc. I notice the MSD and 2nd
gen Nippon Denso injectors work down to about
.8 ms. While the red and yellow RX8 injectors
quit around 1 ms. All of them draw about
.6 to .7 amps at 95% duty cycle.
Next step is plumb them up and measure the flow
as a function of pulse width and RPM. I still need
a few parts like a 50 psi fuel pressure gage which
I will order tomorrow from McMaster Carr.

Paul Lamar

The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2005 All world wide rights reserved.