Paul, I have finished the fuel rail for my intake. It is held in
place by stainless steel bolts that thread into bosses on the side of
the plenum. Ed K welded the injector bosses to the rail for me and
did a very nice job. The injectors are Ford 42s. I am going to make
the top of the plenum removable so there should be a nice photo coming
up of the injectors pointing into the bells. Jerry
Don't forget to tap the oil injector hole for Tracy's pressure
sensor. Use only one. Probably the front (airplane) rotor as that always
seems to run a bit warmer.
Paul Lamar
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2005 All world wide rights reserved.