Subject: Renesis cost (was: Wankel rotaries coming available 3rd to 4th Qurter 2005)
From: Rotary Engine
Date: 7/21/2005, 4:06 PM
To: AA-me

snips..........

Probably not quite apples to apples, but the Renesis is ready to put out
around 250hp vs. 150 for the RotaMax.  Looks like a great setup to me, but
the horsepower available from the Renesis will be worth a little extra in
price.  I'll check with my friend to see what came with his Renesis, but I
know for sure that it did NOT come with radiator, alternator, or coolant
hoses.  He does have his PSRU, and I'll find out if that was part of the
$5700.

Chad Jensen

That the retail price on a short block Chad. No nothing other than
the basic block. Lots of people get them for the dealer price or
$3800. Slightly used are going for less than that with everthing.

Paul Lamar


       As I mentioned earlier, I bought my Renesis six port for $1800 +
$347 shipping + $200 in paperwork costs. (Shipped to Denver.) Alternator,
intake manifold, throttle body, injectors, fuel manifolds, flywheel,
clutch, engine wiring harness, ignition coils plug wire. No exhaust manifold.

From:   Rupert <tannrup@bigpond.net.au>  at Asian Auto Spares, 198 Kingston
Road, Slacks Creek, Queensland, AU 4127  Tel: (07) 3208 0133

       He has about 20 more of them.  They are some sort of test engines
from the factory. I borescoped mine and it looks fine inside and out. I'd
guess that they were used for some sort of pollution testing.

       Bill Dube'

The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2005 All world wide rights reserved.