>
> Paul,
>
> Thought you might have interest in our engine program? Contact me
at
> your convienence. WWW.RotaMax.Net
>
> Thank You
> Eric Barger President
> Thermo Fan Inc 419-694-1400
> eric@thermofan.com
> RotaMax Inc 419-694-3000
> eric@rotamax.net
>
>
>
> The price of these engines is $6000. They use intake charge
cooling
> instead
> of oil....?????
>
> Bill Bradburry
>
I was wondering how the charge cooling works myself??
New Renesis EFI ready engines are available for $5700.
Chad Jensen
Is that an apples to apples price? The Rotamax looks like it comes
ready to run - except for radiator and coolant hoses. The write up
says they provide alternator (generator?) & starter, carburetor, etc.
What comes with the Renesys for $5700?
Joe Hull
Bellevue (Seattle), Washington
Cozy MkIV #991 (working on Engine & Electrical & Finishing)
http://www.maddyhome.com/canardpages/pages/JoeHull/index.html
Probably not quite apples to apples, but the Renesis is ready to put out
around 250hp vs. 150 for the RotaMax. Looks like a great setup to me, but
the horsepower available from the Renesis will be worth a little extra in
price. I'll check with my friend to see what came with his Renesis, but I
know for sure that it did NOT come with radiator, alternator, or coolant
hoses. He does have his PSRU, and I'll find out if that was part of the
$5700.
Chad Jensen
That the retail price on a short block Chad. No nothing other than
the basic block. Lots of people get them for the dealer price or
$3800. Slightly used are going for less than that with everthing.
Paul Lamar
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2005 All world wide rights reserved.