Subject: Wankel rotaries coming available 3rd to 4th Qurter 2005
From: Rotary Engine
Date: 7/21/2005, 2:59 PM
To: AA-me


> >> > Paul,
> >> >
> >> > Thought you might have interest in our engine
program? Contact me
> >> at
> >> > your convienence.  WWW.RotaMax.Net
> >> >
> >> > Thank You
> >> > Eric Barger President
> >> > Thermo Fan Inc 419-694-1400
> >> > eric@thermofan.com
> >> > RotaMax Inc 419-694-3000
> >> > eric@rotamax.net
> >> >
> >> >
> >> >
> >> > The price of these engines is $6000.  They
use intake charge
> >> cooling
> >> > instead
> >> > of oil....?????
> >> >
> >> > Bill Bradburry
> >> >
> >>
> >> I was wondering how the charge cooling works
myself??
> >> New Renesis EFI ready engines are available for
$5700.
> >> Chad Jensen
> >>
> >>
> > Is that an apples to apples price? The Rotamax
looks like it comes
> > ready to run - except for radiator and coolant
hoses. The write up
> > says they provide alternator (generator?) &
starter, carburetor,
> etc.> What comes with the Renesys for $5700?
> >
> > Joe Hull
> > Bellevue (Seattle), Washington
> > Cozy MkIV #991 (working on Engine & Electrical &
Finishing)
> >
http://www.maddyhome.com/canardpages/pages/JoeHull/index.html
> >
>
> Probably not quite apples to apples, but the
Renesis is ready to
> put out
> around 250hp vs. 150 for the RotaMax.  Looks like
a great setup to
> me, but
> the horsepower available from the Renesis will be
worth a little
> extra in
> price.  I'll check with my friend to see what came
with his
> Renesis, but I
> know for sure that it did NOT come with radiator,
alternator, or
> coolanthoses.  He does have his PSRU, and I'll
find out if that was
> part of the
> $5700.
>
> Chad Jensen
>
> That the retail price on a short block Chad. No
nothing other than
> the basic block. Lots of people get them for the
dealer price or
> $3800. Slightly used are going for less than that
with everthing.
>
> Paul Lamar
> --
I just paid $3K for a 6-port engine complete with
everything (intake, exhaust, alt., mounts,
injectors, etc.) from an RX-8 with 2,000 miles, that
is getting a 3-rotor conversion.  It is going to
Bruce Turrentine for aviation upgrades, followed by
Tracy's components.

Scott Gettings


Scott, what are you having done by Bruce and how are you going to
manage the
6 port intake?

Bill Bradburry



HELP!!! I am receiving hundreds of email copies from this list please
remove my email adress it is flooding my ISP.

Thank You
Eric Barger President
Thermo Fan Inc 419-694-1400
eric@thermofan.com
RotaMax Inc 419-694-3000
eric@rotamax.net


Well there you have it :) Apparently not interested :)

Paul Lamar

The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2005 All world wide rights reserved.