Subject: Cato prop for sale.
From: Rotary Engine
Date: 7/25/2005, 8:49 PM
To: AA-me



I doubt this 180 HP prop will absorb the HP of a turbo or p-port rotary/

Paul Lamar

Paul, my friend has Velocity with IO-360 200HP and can not develop RPM for
safe flight. It has way too much pitch and wider blades than his standard
Performance prop.
Bulent

++++++++++++++++++++++++++++++++++++++++++++++
200 HP is a long way from 250 to 275 HP.

With only 68 inch diameter and pitch of 82 it still sounds like it is too small.

Dave Leonard what diameter and pitch are you now running?

Paul Lamar

Guys that's 68x82 ->> 3 Blade <<-
That's a lot of prop!


Mike McGee, RV-4 N996RV, O320-E2G, Hillsboro, OR
13B in gestation mode, RD-1C, EC-2

Why then did he rate it at 180 HP?

Paul Lamar

Don't know where the 180 figure came from but the Ebay ad says it's for an
O/IO-540 at 250-300 HP.  Max RPM is 3000.  Sounds perfect for a Turbo 13B,
2.85:1 RD-1C powered canard.

Dave, you should call Craig Catto and ask him if it would work on your
plane with the 2:17 turning the other way up front.  I suspect it's too
much prop for the RV-6.

An 82" pitch turning 3000 rpm?  That's moving out...


Mike McGee, RV-4 N996RV, O320-E2G, Hillsboro, OR
13B in gestation mode, RD-1C, EC-2


The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2005 All world wide rights reserved.