Hi Jerry-
I installed the engine mount on the M2 over the weekend - mount points
lined up very well & only needed a wee bit of convincing to get the
bolts through. One thing I immediately noticed was that the S-beam is
at an angle. I measured the airframe at the main spar and it claimed
to be level. The
SBeam was measured at exactly 1 degree off horizontal. I don't have
the best angular measure in the world, so take this with a little
grain of
salt.
Anyway -- I can't for the life of me remember whether the angle was
something planned for (i.e., thrust angle or something like that) or
whether it was expected to be level.
Thoughts?
Mark
I don't know what Jerry did for a rear mount but it should
be adjustable. Here are a few ideas.
Paul Lamar
Here is Bill Schertz's beautiful rear motor mount.
Paul Lamar
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2005 All world wide rights reserved.