Subject: M2 S-Beam Engine mount at an angle
From: Rotary Engine
Date: 7/25/2005, 5:55 PM
To: AA-me



Hi Jerry-

I installed the engine mount on the M2 over the weekend - mount points
lined up very well & only needed a wee bit of convincing to get the
bolts through.  One thing I immediately noticed was that the S-beam is
at an angle.  I measured the airframe at the main spar and it claimed
to be level.  The
SBeam was measured at exactly 1 degree off horizontal.   I don't have
the best angular measure in the world, so take this with a little
grain of
salt.

Anyway -- I can't for the life of me remember whether the angle was
something planned for (i.e., thrust angle or something like that) or
whether it was expected to be level.

Thoughts?

Mark

I don't know what Jerry did for a rear mount but it should
be adjustable. Here are a few ideas.

Paul Lamar

Mark,  send me a picture showing the angle.  The beam was fitted to
my test engine and seemed to be o.k. then but that was a long time
ago.   FYI Paul,  no rear mount was supplied.     Jerry

The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2005 All world wide rights reserved.