Guys that's 68x82 ->> 3 Blade <<-
That's a lot of prop!
Mike McGee, RV-4 N996RV, O320-E2G, Hillsboro, OR
13B in gestation mode, RD-1C, EC-2
Why then did he rate it at 180 HP?
Paul Lamar
Because the information given to Cato was too optimistic for the engine. I
believe
they wanted to run it with Chevy engine with reduction drive, But at this
configuration is too much even for the
200HP IO-360.
Bulent
Bulent please measure the width of the blade at 30%, 50%, 70%, and 90% radius.
Paul Lamar
Paul, the prop is 20 miles away from me. I can not do it at the moment.
Bulent
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2005 All world wide rights reserved.