Subject: Cato prop for sale.
From: Rotary Engine
Date: 7/31/2005, 6:08 AM
To: AA-me


http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll? ViewItem&item=4564632860
This prop belongs to a friend of mine and would be good for  people with
2.8
PSRU and 20B engine.
Bulent
Paul or Vance, would this prop work on the PPort 13B? T.W.
I suspect it would.
Vance? 275 HP at 7500 eng RPM
2600 prop RPM. Come to thing of it Tom vance is at OSH.
Paul Lamar

This sounds like a candidate for my p-ported 13b.  I'll take a  look at
at the listing when I get home tonight -- ebay is blocked here  at the
office.
Mark

Bulent-
Can you get the details on this prop?  Someone was kind enough to
email me a jpeg of the ebay listing & the prop is definately a
contender for what I need.  Now I need to nitty-gritty like  diameter,
pitch. hub hole spacing, etc.
Mark
Is'nt this prop set for reverse rotation, the 2.85:1 is normal  rotation I
think.

John

You think right. The prop is set for normal(Lycoming) rotation

Craig Catto can plug the bolt holes and drill  new ones from the
opposite side to reverse rotation, which will work if you are also
going from pusher to tractor.   I have a Catto 3 blade also intended
for a Velocity that the 1O 360 200 hp engine could not turn.  Strange
this would come up twice.   Jerry



-- 
The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2005 All world wide rights reserved.