Subject: P-port fuel burn and performance data
From: Rotary Engine
Date: 7/31/2005, 11:27 AM
To: AA-me



This is from the Power Sport P-port 13B engine RV8 installation.
The mixture was not necessarily optimally leaned on these
engines when this data was taken. The computer decided at
that time. Power Sport is rumored to be changing the software
so the engine can be manually leaned. It also reflects
a less than optimum MT composite (98% wood) electric
constant speed prop. Tracy Saylor tested this prop and
found it 10 to 15 MPH slower than a metal constant speed prop
on his 238 MPH RV6 race plane.

The second scan is from an article in the RVator news letter.
A muffler of sorts has also been added since this data was taken.

Paul Lamar


Paul, do you know whether the stated noise values are ICAO annex 16
Chapter 10 standard measurements (I think FAR 36 has been harmonised
with Annex 16)?

There is some guidance concerning acceptable noise measurement here:
http://www.icao.int/icaonet/dcs/9501_3rd.pdf

We have an RV-8 (lycoming powered) here in Austria with these Exhaust
louvers. Hard to believe they will survive long on a wankel after Ed's
experiences with the fishtails.

Mark.


1/8th inch thick (3 mm) Inconel should be no proplem :)

Paul Lamar


-- 
The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2005 All world wide rights reserved.