Tom Weber  and everybody. I am off to the water jet guys
and have some of these 1/4 inch thick spacers made. No holes other than
the big one will be cut. It will be up to you to match
drill the bolt holes with the covers.

Tom should be maintaining a list of those that ordered
p-port slide throttles so I need to know how many to make.
My guess is 20. Tom will be cutting the covers and flanges.

Any comments?

I don't know the price yet. Tom will set the price
as he will be shipping them to individuals.
I will ship the spacers to Tom.

Paul Lamar

Paul, here is the Rev 10 Slide Throttle.  I"ve made several plates and these look really good.  I"ve also contacted a water Jet cutting company in Sacramento.  They want $83.00 each to cut the spacer.  I went on Emachine shop and they will cut just the shape no bolt holes for $24 each.  So I was going to let them cut these.  If you want to cut them be my guest.  If not let me know and I'll contune with Emachine shop and have completed kits to mail out in a month or so.  Currently we have 8 people interested in the Kits.  Looks like we will keep the cost to around $55 or $60 before shipping.  Any questions or comments let me know.  T.W.

OK Tom its your show. Hurry up as I need two sets.

BTW Please don't send bmp's. Please load them into paint or photo shop and
save as jpg's. Please send the jpg's and not the bmp's.

I don;'t know what generated that bmp you sent but my xv had trouble converting
it to a jpg. Are you using a Mac?

Paul Lamar

Tom, I wanted to be sure that you had me on the list for a kit.  Thanks,

Barry Doublestein



The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2005 All world wide rights reserved.