Paul, here is the Rev 10 Slide Throttle.  I"ve made several plates and these look really good.  I"ve also contacted a water Jet cutting company in Sacramento.  They want $83.00 each to cut the spacer.  I went on Emachine shop and they will cut just the shape no bolt holes for $24 each.  So I was going to let them cut these.  If you want to cut them be my guest.  If not let me know and I'll contune with Emachine shop and have completed kits to mail out in a month or so.  Currently we have 8 people interested in the Kits.  Looks like we will keep the cost to around $55 or $60 before shipping.  Any questions or comments let me know.  T.W.

OK Tom its your show. Hurry up as I need two sets.

BTW Please don't send bmp's. Please load them into paint or photo shop and
save as jpg's. Please send the jpg's and not the bmp's.

I don;'t know what generated that bmp you sent but my xv had trouble converting
it to a jpg. Are you using a Mac?

Paul Lamar

Tom, I wanted to be sure that you had me on the list for a kit.  Thanks,

Barry Doublestein

TOM,  I'm in also, please.

Waiter

John McAvoy
LongEZ-RG


OK People send your request directly to Tom.
Twebber@cityofsacramento.org

Paul Lamar

Tom why the radius on the Teflon holes?
I can see two drawbacks. One the Teflon connection between
sections is not as strong. Two when the slide is WOT there
will be more of a discontinuity around the slide.
WOT is the conditions most AC engines run at over 8,000
feet altitude.

Paul Lamar