Paul,  I want to move the alternator down to the lower right side of
the engine. I know you have already done this.  Can  you offer any
advice, plans, photos?  Also, what about under driving the
alternator?    Thanks,  Jerry

No problem. You just have to worry about the oil outlet fitting and
the crank angle sensor. Easier if you use an RX8 or 3rd gen crank
angle sensor on the front pulley. I just used a chunk of angle iron.
All the load is on the angle iron. The other alternator mounting boss
can be supported by almost anything.

Paul Lamar


The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2005 All world wide rights reserved.