I want to buy or build an adapter to mount my Renesis to a conventional
engine stand.  Where on the engine should the adapter mount?  I don't want
to take a chance on breaking out the bosses.  I was thinking that the motor
mount bosses might be ok, but I saw where several were for sale that mounted
on the AC mount bosses.

Also, what should be the min thickness of the plate?  All I have is a vice,
torch, and hammer so I want the plate the minimum thickness to do the job.

Additionaly, can I use the stock ignition coils with Tracy's EC2 or will I
have to buy the LS1 coils?

And, Will the stock Renesis Flexplate work with Tracy's RD-1C drive? Or will
I have to locate one from a 2nd gen?

Bill Bradburry


**************************************************
Ops I missed the Renesis part. I take it all back.

You will have to contact Tracy on the coils.

I also don't know on how to mount it as I have never
done a RX8 engine yet.

I don't know on the last question. Call Tracy to find out
as he rarely monitors this news letter. (386)  935 2973
Please let me know what he says and I will see if I can file
the info someplace.


Paul Lamar