Subject: 13b flywheel 86-91 flex plate on RX8 engine
From: Rotary Engine
Date: 8/7/2005, 8:08 PM
To: AA-me

>
Dave unfortunately that is not the correct plateeither. You will haveproblems bolting a starter up to the redrivebecause the startergear does
comes out to far and does not disengage thestarter. You have a flexplate from
a 89-91 13B.  

Respectfully,

Doug Mueller
RX-6 13BT
N900DM
Boulder City, Nevada



I've discussed using a 6-port Renesis with Tracy.
With his redrive, he said you can use a 86 - 91 RX-7
auto flex plate.

Scott Gettings

Sorry, hate to be argumentative.. I've got the correct flex plate, with
a correct starter mounted to it, and I have already used the starter to
crank the engine to prove that it engages and disengages properly. One
practical test trumps an analysis any day.

The R D series damper will not mate to the wrong year flex plates. If you
noticed, i attached 3 pictures.. one was a manual tranny.. one was a 3rd
gen auto plate (wrong kind for use) and the 3rd pic was the proper one
(WITH the damper plate already installed - i didnt have any pics without
the damper in place, and I am NOT disassembling the redrive again until
inspection time..

Dave Staten


The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2005 All world wide rights reserved.