Paul:
Next time you talk to the Mazdatrix guys, thank them for the great job
they did on my engine.
It's been on the plane for four years now, I haven't taken it off since
I installed it in Palm Springs June 2001.
375 hours on it now, never a problem. 540 hours total.
It did start leaking oil from somewhere around the front cover on the
right side after about 1 year. I've never been able to locate the source
exactly. But it's a low seepage that I just live with, not worth taking
the engine off for. I have to add a quart every 3 to 4 hours, but some
of that loss is injected oil - two remaining oil injectors in the
engine, the two from the intake manifold have been removed.
I recently completed a round-trip from Oregon to Kansas, the engine
continues to perform flawlessly. My biggest problem travelling is
finding mogas. I can't burn 100LL, it will foul my plugs every time.
Updates on http://www.ductedfan.com
Perry
Hi Perry,
I am glad to hear that you are having good luck with your rotary
install. I enjoyed looking at your website. I think you could see
measurably improved fuel economy with some aero cleanup. Wheel fairings
(the low drag kind like Klaus Sauvier, Bill James, or Brian Alley
sell) should be worth 10kts or better, plus several more from gear leg
fairings.
Your lower cowling looks a little strange. Does it still have a
mounting place for the duct? Maintaining clean airflow through the
propellor will increase both cruise speed and climb performance.
Aero cleanup, plus a leaning circuit should easily get you into the
mid-20's for fuel economy.
Regards,
Matt-
VE N34RD, C150 N714BK
I had the small 3.5x5.00 Lamb tires on the plane from the beginning
until just a few weeks ago, with wheel pants. The small tires only last
100 hours and I've been through several sets. So I decided to put real
airplane tires on and installed 5X5.00s. Will work better on rougher
fields. I'm thinking about installing some RV wheel pants, they have a
pressure-recovery set that look nice. I will be "giving away" the
original Featherlite wheel pants for $50 OBO including shipping. Anyone
interested email
pjmick@viclink.com
The duct was mounted three-points, left, right and upper. The lower cowl
was modified for a thicker rad, two-pass counterflow. My original rad
was too marginal in hot weather. Now the coolant temp never budges from
"normal", just like in the car.
It is all packed in and there is no room for aero improvement there,
unless I move the prop farther aft with an extension. But I won't do
that until I build a new engine mount and raise the thrustline 2" back
to normal. And I'm not doing that until I have to take the engine off
for some reason.
Perry
They may be quite a while given the rotary engine :)
Lets see 271 hours in 4 years. Lets say 70 hours a year.
3000 hours TBO... 43 years :) It is obvious where the rotary
will pay off big time is when Mistral gets it certified
and STC's are available for commercial service.
Paul Lamar
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2005 All world wide rights reserved.