Subject: Trip to Al Gietzen's house.
From: Rotary Engine
Date: 8/10/2005, 12:18 PM
To: AA-me


To: AA-me <rotaryeng@earthlink.net>

This is one of the finest rotary engine installations
that I have ever seen.

Here is Al's muffler system. You can hear it on Al's website.
http://members.cox.net/alg3/airplane.htm

These picture I took should supplement the many pictures Al has on his
web site. I'll try not to be redundant.

Here are pictures of Al's Inconel tangential muffler. From my
subjective experience the sound level is acceptable however
I forgot to take my DB meter. I think pusher airplanes tend to chop
up the sound waves and lower the noise level.

Next message-------------------------

Al has implemented a very original idea for mounting and ducting his oil
cooler and auxiliary water radiator.

The air is taken in from the bottom of the wing behind the spar
and exited through this reverse scoop on the top of the wing.
There is very little intake scoop per say below the wing. It mostly
relies on the pressure difference between top and bottom of the
wing and whatever low pressure is generated behind the reverse
scoop air out let device.

I can't wait to see how well it works. If it works well enough it could
help a lot of people building pushers.

That is the new Griffin oil cooler with the extruded flat oil
tubes with many short walls connecting the wide top and
bottom main walls of the oil tubes. Should be good to a couple
of hundred psi. I think Al said it was pressure tested to
150 psi so far.

Paul Lamar

The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2005 All world wide rights reserved.