Subject: exhaust cooling /velocity
From: Rotary Engine
Date: 8/16/2005, 9:45 AM
To: AA-me


Hey Paul! Do you remember Joe Schiferl's velocity and how loud it was when it left
Oshkosh? Proving that you can kill people with sound good lord that was loud. Even
when he was outta sight. I could clearly hear his airplane. Anyway I thought that the
concept for cooling was interesting. but I was wondering if the shroud that he had
behind his airplane where the exhaust exited out the back there! I was wondering if
that whole thing couldn't be turned into some kind of muffler to get the D.B's down a
bit. Here is the drawing of what I think it may look like.
may work on my Long ez.

Tony

No muffler. Just an augmenter. You can hear all rotaries miles
away as they have a unique sound.

Paul Lamar

I'm working at fabricating an augmenter [Ejector] similar to what Tony sketched out
(see attached jpg).  I am considering placing some mineral wool or other
sound deadning material in the augmenter side walls.  The exhaust/cooling
air temperatures should be considerably less than a conventional muffler and
the air stream velocities should also be reduced which gives the 'glass
pack' a much better chance of serviving.
D Johnson

Good idea. Easy to do. Might work well.
However that was a blank jpg file you attached.

Paul Lamar

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2005 All world wide rights reserved.