Subject: exhaust cooling /velocity
From: Rotary Engine
Date: 8/16/2005, 3:57 PM
To: AA-me


    > Hey Paul! Do you remember Joe Schiferl's velocity and how loud it
   was when
    > it left
    > Oshkosh? Proving that you can kill people with sound good lord
   that was
    > loud. Even
    > when he was outta sight. I could clearly hear his airplane. Anyway I
    > thought that the
    > concept for cooling was interesting. but I was wondering if the
   shroud
    > that he had
    > behind his airplane where the exhaust exited out the back there!
   I was
    > wondering if
    > that whole thing couldn't be turned into some kind of muffler to
   get the
    > D.B's down a
    > bit. Here is the drawing of what I think it may look like.
    > may work on my Long ez.
    >
    > Tony
    >
    > No muffler. Just an augmenter. You can hear all rotaries miles
    > away as they have a unique sound.
    >
    > Paul Lamar

   I'm working at fabricating an augmenter [Ejector] similar to what
   Tony sketched out
   (see attached jpg).  I am considering placing some mineral wool or other
   sound deadning material in the augmenter side walls.  The
   exhaust/cooling
   air temperatures should be considerably less than a conventional
   muffler and
   the air stream velocities should also be reduced which gives the 'glass
   pack' a much better chance of serviving.
   D Johnson

   Good idea. Easy to do. Might work well.
   However that was a blank jpg file you attached.

   Paul Lamar

I think that's a good idea. I did it quite a few years ago to the open
exhaust on my VW gyro, I called it a "halo", It consisted of a very
light aluminium tube about 9" diameter about 2' long open at both ends
and lined with rock wool. It certainly took the edge off the exhaust
note. It would probably work well on the high frequency stuff from a
rotary. I think I had the exhaust pipe terminating  about 3" into the
halo.Air entering the front kept it all cool.

John Evans

-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2005 All world wide rights reserved.