> Hey Paul! Do you remember Joe Schiferl's velocity and how loud it
was when > it left
> Oshkosh? Proving that you can kill people with sound good lord that
was > loud. Even
> when he was outta sight. I could clearly hear his airplane. Anyway
I > thought that the
> concept for cooling was interesting. but I was wondering if the
shroud > that he had
> behind his airplane where the exhaust exited out the back there! I
was > wondering if
> that whole thing couldn't be turned into some kind of muffler to
get the > D.B's down a
> bit. Here is the drawing of what I think it may look like.
> may work on my Long ez.
>
> Tony
>
> No muffler. Just an augmenter. You can hear all rotaries miles
> away as they have a unique sound.
>
> Paul Lamar
I'm working at fabricating an augmenter [Ejector] similar to what
Tony sketched out
(see attached jpg). I am considering placing some mineral wool or other
sound deadning material in the augmenter side walls. The
exhaust/cooling
air temperatures should be considerably less than a conventional
muffler and
the air stream velocities should also be reduced which gives the 'glass
pack' a much better chance of serviving.
D Johnson
Good idea. Easy to do. Might work well.
However that was a blank jpg file you attached.
Paul Lamar
Paul I like the idea of using 2 augmenters [ejectors] do you think a
square augmenter [ejector] would help keep the D.B.'s down like on the
powersport birds? or does the exhaust have to go into a type of
expansion chamber then out the square tubes for that to work?
Tony LongEZ
Well according to the Russians square or rectangular is quieter than
round.
Can't say if it will be quiet enough. That is a very subjective thing
with most people. Some accept 100 db and others might think 85 db is
too noisy. If you do use an expansion chamber I think that will defeat
the ejector. Try the perforated square or rectangular ejector with
steel wool first.
Get some of these papers from the NACA web site and read up on ejectors.
http://naca.larc.nasa.gov/
**********************************************************
2715. Acker, Loren W Kleinknecht, Kenneth S , ***Flight comparison of
performance and cooling characteristics of exhaust-ejector
installation with exhaust-collector-ring installation ,
<http://naca.larc.nasa.gov/reports/1947/naca-rm-e6l13a/>* NACA
RM-E6L13a , February 14, 1947 , pp. 37 .
We have this one.
2259. Manganiello, Eugene J Bogatsky, Donald , ***An experimental
investigation of rectangular exhaust-gas ejectors applicable for
engine cooling ,
<http://naca.larc.nasa.gov/reports/1945/naca-report-818/>* NACA
Report 818 , 1945 , pp. 19 .
We have this one too. Not very relavent.
4694. Fred D. Kochendorfer and Morris D. Rousso, ***Performance
characteristics of aircraft cooling ejectors having short
cylindrical shrouds,
<http://naca.larc.nasa.gov/reports/1951/naca-rm-e51e01/>* NACA RM
E51E01, May 1951, pp. 41.
4760. Ellis, C. W., Hollister, D. P. and Sargent, A. F., Jr.,
***Preliminary investigation of cooling-air ejector
performance at
pressure ratios from 1 to 10 ,
<http://naca.larc.nasa.gov/reports/1951/naca-rm-e51h21/>* NACA
Research Memorandum E51H21, 1951, pp. 23.
5399. Greathouse, W. K. and Hollister, D. P., ***Preliminary air-flow
and thrust calibrations of several conical cooling-air ejectors
with a primary to secondary temperature ratio of 1.0 I :diameter
ratios of 1.21 and 1.10 ,
<http://naca.larc.nasa.gov/reports/1952/naca-rm-e52e21/>* NACA
Research Memorandum E52E21, 1952, pp. 26.
5433. Greathouse, W. K. and Hollister, D. P., ***Preliminary air-flow
and thrust calibrations of several conical cooling-air ejectors
with a primary to secondary temperature ratio of 1.0. II
:diameter
ratios of 1.06 and 1.40 ,
<http://naca.larc.nasa.gov/reports/1952/naca-rm-e52f26/>* NACA
Research Memorandum E52F26, 1952, pp. 35.
6401. Huntley, S C Yanowitz, Herbert , ***Pumping and thrust
characteristics of several divergent cooling-air ejectors and
comparison of performance with conical and cylindrical ejectors ,
<http://naca.larc.nasa.gov/reports/1954/naca-rm-e53j13/>* NACA
RM-E53J13 , January 20, 1954 , pp. 44 .
************************************************************************
Paul Lamar
HI Paul and group,
I think it depends on where you fly and the restriction that are in
place at any given airfield. I am sure we have all experienced the noise
of many aircraft. If the locals don't complain then let the Rotary howl.
I must say we in Australia are a bit spoil't in that way. To be more
concerned with the rest of the population I wish that guy with the
Harley whould not drive up my street. Most motor bikes and Harleys will
produce more noise than any rotary. We should make our self known also.
Regards Don
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2005 All world wide rights reserved.