Hi Paul.
lovely looking cars, what powerplants and trans did they use? No
rotaries , I guess. BR, Dave McC
Not in those days. The rotary was just getting started. I knew
about them as I had a NSU one rotor Spider on order in Germany
when I got the job offer from Jim Hall and Chaparral. Most young engineers
at the time would sell their wife to get such a job. Heck
I would have given her away:) Not Robin. Needless to say I canceled
the planned trip to Europe and packed up all our stuff and drove off to
Midland Texas. My wife at the time cried when she first spied Midland off in
the West Texas desert distance. She was born and raised in West Chester
county NY. Ex president Cliton is probably now living in her old house :)
What we had were aluminum small block Chevy V8's mostly and aluminum big
block Chevy V8's later on from Chevy R&D. All were good for up to two
hours TBO when raced. I use the term TBO loosely as most of the engine parts
were cracked after two hours and good only for melting down
and recycling. That included the block itself.
The tranny was a face dog, crash gear box and a torque converter.
You let up slightly on the gas and shifted quickly.
First boxes were two speed versions then up to four speeds later on.
The high stall torque converter was horribly inefficient when actually
converting torque. Something like 40% of the HP went off to the
transmission cooler in the form of waste heat. Most other racers
would easily beat us in a standing start as they would rev the
engine and side step the clutch. When the torque converter
was "locked up" it still slipped about 3%. Later on we had
real lock up torque converters with a clutch common in todays auto tx's.
We used them strictly for GM auto transmission sales promotion reasons.
Paul Lamar
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2005 All world wide rights reserved.