Subject: Shield those motor mounts
From: Rotary Engine
Date: 8/25/2005, 6:40 AM
To: AA-me


       >   >     Hi Paul,
       >   >     We were recommended to buy engine mount for RV-6a from
      Fred Breeze
      @
       >   >     Conversion Concepts. We ordered & paid for engine mount &
      had leg
       > sent
       >   >     from Van's to Fred so he could fit it to mount.  This all
      happened
       > in
       >   >     July 04. He keeps telling us 2 weeks & that has been
      going on for
       >   >     6months or more. Do you know much about this company &
      what the
       > problem
       >   >     would be, as he is not levelling with us. He isn't
      replying to our
       >   >     emails.
       >   >
       >   >     Bill & Peter
       >   >
       >   >     Sorry to hear that.
       >   >     I don't know much about the company but I never really
      like his
       > designs.
       >   >     Too expensive for one thing.  Perhaps he is sick. Have
      you asked
      for
       >   >     your money back?
       >   >
       >   >     Jerry Hey has been building pretty good motor mounts for
      reasonable
       >   >     prices.  Jerry Hey <jerryhey@earthlink.net
      <mailto:jerryhey@earthlink.net>
       >   >     <mailto:jerryhey@earthlink.net>>
       >   >
       >   >     If Jerry Hey can't help you I have race car fabricator
      guy next
       >   >     door to Mazdatrix in Signal Hill I have been doing
      business with
      who
       >   >     does good work and is reliable and timely. I am also near
      by to
       >   >     check on his
       >   >     work.
       >   >
       >   >     Paul Lamar
       >   >
       >   >     BTW Is there anybody near by Fred Breeze that can stop by
       >   >     and see what is going on?
       >   >
       >   > Hi Paul,
       >   > I ordered mine in Jan, and He just informed me that he'll be
      shipping
      it
       >   > this Friday, we'll see.
       >   > I do believe he had some sort of health problem in Feb-Mar.,
      and if
      you
       >   > check the site, he's made some changes  to make access to
      intake &
       >   > exhaust plumbing easier.
       >   > Harold
       >   >
       >
       >   Harold,
       >   Have you received your engine mount from Fred Breeze. You were
      expecting
       > to receive it in July.  We still haven't got ours.  If you let us
      know if
       > you have yours, then we know that we have been duped by Fred.
       >
       >   regards,
       >   Bill & peter

      Paul and All,
      Michael Hayes in Australia ( Melbourne) is another one who has had
      the run
      around from Fred. He has taken the money but not supplied, with all the
      promises in the world. Perhaps someone over there should approach him on
      behalf of all the people who are disgruntled customers.
      I will pass this discussion onto Michael so that he's aware that
      he's not
      the only one.
      George ( down under)




Yes I received my mount about 2 weeks ago, I'd hope that by now he's
catching up with his backlog...the mount looks good, I now have it on my
plywood firewall mockup to start figuring out where everything will go.
I would guess that soon you'll have yours. I'm glad that I didn't wait
'til a few weeks before I needed it to order. I ndid make numerous phone
calls, which he returned, and a few e-mails which he answered.
Hope you get it soon.
Harold


What did the mount cost Harold ?
What does it weigh?

Paul  Lamar

If you are using the Conversion Concepts mount make sure you
shield the rubber bushings from the exhaust. This engine only had
a few hours on it. The rubber bushing is already showing signs of melting.
The rubber bushings catch hell from heat as they transfer the full oil temperture
by conduction directly to the rubber bushings through the
aluminum plate.

Paul Lamar


That would be wise in any instance. Mazda does that (completely shields the motor mounts) in the stock FD, 1991+ 13Brewtt engine.
Marc W.

It is not a problem with the Schertz beam as it is long enough to move
the mounts away from the exhaust in a tractor. Also the steel beam
does not pick up as much heat directly from the oil. If for some strange
reason it did it would not conduct the heat to the rubber bushings as well as
aluminum does.  A pusher could be another story if the exhaust runs
too close to the rubber bushings.

It is details like this we are constantly discovering and rectifying.

Paul Lamar


The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2005 All world wide rights reserved.