Hi Paul.
lovely looking cars, what powerplants and trans did they use? No
rotaries , I guess. BR, Dave McC
***** What we had were aluminum small block Chevy V8's mostly and
aluminum big
block Chevy V8's later on from Chevy R&D. All were good for up to " two
hours TBO" when raced. I use the term TBO loosely as most of the
engine parts
were cracked after two hours and good only for melting down
and recycling. That included the block itself.
> Paul Lamar
Really true??
After 2 hours, you trashed them? Why the hell would anyone use them in
airplanes?
'long live the rotary'
BR, Dave McC
Really true.
Hope springs eternal. Every year at OSH there is at least one new
person building a Chevy V8 into an aircraft somewhere. Mostly
you never hear from them again. In some cases people have persevered
for a few years but they eventually give up as well.
The classic example is the Orenda V8 wherein $50 million (mostly Canadian
tax
payers money) was spent over a 20 or 30 year development period. Now
bankrupt.
There is one highly successful direct drive Ford V8 with all after market
chromolly parts and aluminum block air racing out here in the Western US.
10 year development. Now going around 250 MPH in a higly developed Long EZ.
Owned by Gary Spenser. So far he has less than 1000 hours. The engine is
derated to about 230 HP and never runs over 3300 RPM. Weighs roughly
400 pounds.
Paul Lamar
Hi Paul,
From South Africa, thanks for all your input and
information on the wankel engines. There are not
many of the flying, but there are a few people,
like myself busy on a wankle for a 601 XL Zodiac.
Thanks
Piet Cillié
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2005 All world wide rights reserved.