Subject: Aluminum Oil Pan for sale
From: Rotary Engine
Date: 8/30/2005, 6:24 AM
To: AA-me


     > > My friend in Denver, Gary Ketter, who is an expert aluminum
    welder, built
     > > this pan to my drawings. It was designed for a 2nd gen engine.
    A Renesis
     > > owner wanted an oil pan and I wrongly assumed it would be the
    same size as
     > > the 2nd Gen. Gary built another pan specifically designed for
    the Renesis,
     > > and now has this one for sale. It is the same as the one he
    built for me,
     > > except it has no fins, and has some extra internal volume as a
    result of
     > > not
     > > having fins on the outside.
     > >
     > > This oil pan should work for anyone who has a 13B with a 1st or
    2nd gen
     > > front cover. I'm not familiar with the 3rd gen to know if it
    will work,
     > > and
     > > it will not work on a Renesis.
     > >
     > > Excellent workmanship! Contact Gary at gketter@meurerresearch.com
     > >
     > > Perry Mick
     >
     > Hi Perry, How Much?
     > Harold...13B

Hi Perry,
Please note that the '85 and earlier front covers are deeper than the
'86 and later front covers.  An oil pan built for a '85 will not fit a
'86 13b.  A picture is attached.

Ken Powell
Bryant, Arkansas
501-847-4721
C150 / RV-4 under construction

That is a 12A cover on the left Ken. Not a 13B.

Paul Lamar

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2005 All world wide rights reserved.