Subject: Dave Leonards ME109 air intake.
From: Rotary Engine
Date: 8/30/2005, 1:04 PM
To: AA-me



I think this is so cool.
Here is Dave's ME109 style air scoop for the turbo.

Paul Lamar


Very nice, can you give dimensions?
Bill Schertz
KIS Cruiser # 4045

Don't have the dims. Bill but my guess is around 5 inches.

With a 2.8:1 gear box the runner length is about right for
for stright tubes coming out of the side of the cowl
as in this 3D. Could be P-port or side port.
Will work best with slide throttle and P-port.

Paul Lamar


Just a quick question here from the intuitive engineering department: Would
the input charge entering into the engine through the scoop be better
balanced if the scoop was tapered along its length--much as the tapered
intake for the cooling systems I have seen here distribute the flow across a
radiator?
~ Grant Johnson

I would assume so from some of the R&D we have done on rad
air intake ducts. Here is a pic of Al Gietzen's intake duct.
Also a better 3D of the Me109 style shaker scoop.

Paul Lamar

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2005 All world wide rights reserved.