********************************************************** 2715. Acker, Loren W Kleinknecht, Kenneth S , ***Flight comparison of performance and cooling characteristics of exhaust-ejector installation with exhaust-collector-ring installation , * NACA RM-E6L13a , February 14, 1947 , pp. 37 . We have this one. 2259. Manganiello, Eugene J Bogatsky, Donald , ***An experimental investigation of rectangular exhaust-gas ejectors applicable for engine cooling , * NACA Report 818 , 1945 , pp. 19 . We have this one too. Not very relavent. 4694. Fred D. Kochendorfer and Morris D. Rousso, ***Performance characteristics of aircraft cooling ejectors having short cylindrical shrouds, * NACA RM E51E01, May 1951, pp. 41. 4760. Ellis, C. W., Hollister, D. P. and Sargent, A. F., Jr., ***Preliminary investigation of cooling-air ejector performance at pressure ratios from 1 to 10 , * NACA Research Memorandum E51H21, 1951, pp. 23. 5399. Greathouse, W. K. and Hollister, D. P., ***Preliminary air-flow and thrust calibrations of several conical cooling-air ejectors with a primary to secondary temperature ratio of 1.0 I :diameter ratios of 1.21 and 1.10 , * NACA Research Memorandum E52E21, 1952, pp. 26. 5433. Greathouse, W. K. and Hollister, D. P., ***Preliminary air-flow and thrust calibrations of several conical cooling-air ejectors with a primary to secondary temperature ratio of 1.0. II :diameter ratios of 1.06 and 1.40 , * NACA Research Memorandum E52F26, 1952, pp. 35. 6401. Huntley, S C Yanowitz, Herbert , ***Pumping and thrust characteristics of several divergent cooling-air ejectors and comparison of performance with conical and cylindrical ejectors , * NACA RM-E53J13 , January 20, 1954 , pp. 44 .